Digital storage oscilloscope SDO1022 BP 25 MHz / 100 MS/s

Features . Bandwidth : 25MHz and 100MHz . Sample rate : 100MS/s - 1GS/s . 2-Channel . Ultra-thin body . 7 inch high resolution LCD . SCPI, and LabVIEW supported Technical Data SDO1022 SDO1102 Channels 2 2 Bandwidth 25MHz 100MHz Sample Rate 100MS/s 1GS/s Display 7" color LCD, 800 x 480 pixels HorizontalScale 5ns/div - 1000s/div 2ns/div - 1000s/div Rise Time 17.5ns 3.5ns Input Impedance 1MΩ ± 2%, in parallel with 20pF±5pF Channel Isolation 50Hz : 100 : 1, 10MHz : 40 : 1 Max Input Voltage 400V (PK - PK) (DC+AC,PK - PK) DC Gain Accuracy ±3% Record Length 10K DC Accuracy(average) ≥16：±(3% reading + 0.05 div) for △V Probe Attenuation Factor 1X, 10X, 100X, 1000X LF Respond (AC, -3dB) 10Hz (at input, AC coupling,-3dB) Sample Rate Relay Time Accuracy ±100ppm Interpolation sin (x) / x Interval (△T) Accuracy (full bandwidth) Single : ±(1 interval time + 100ppm x reading + 0.6ns) Average>16: ±(1 interval time + 100ppm x reading+ 0.4ns) Input Coupling DC, AC , and GND Vertical Resolution(A/D) 8 bits (2 channels simultaneously) Vertical Sensitivity 5mV/div - 5V/div (at input) Trigger Type Edge, Video Trigger Mode Auto, Normal, and Single Trigger Level ±5 divisionsfrom screen center Line / Field Frequency (video) NTSC, PAL and SECAM standard Cursor Measurement △V, and △T betweencursors Automatic Measurement Vpp, Vavg, RMS, Frequency, Period, Vmax, Vmin, Vtop, Vbase, Width, Overshoot, Pre-shoot, Rise time, Fall time, +Width, -Width, +Duty,-Duty, Delay A->B (up) , Delay A->B (down) , area, cycle area Waveform Math ＋, －, x, ÷, invert, FFT Waveform Storage 16 waveforms Lissajous Figure Bandwidth Full bandwidth Phase Difference ±3 degrees Communication Interface USB host, USB device Frequency Counter available Power Supply 100V - 240V AC, 50/60Hz, CAT II Power Consumption ＜15W Fuse 2A, T class, 250V Dimension (W x H x D) 301 x 152 x 70 mm Weight 1.10 kg