VERTUS CLA 406A/+VERTUS CLA 118SA

VERTUS CLA 406A/+VERTUS CLA 118SA Steeped in classic Italian design and acoustic expertise, VERTUShas been created with the aim of extending true line array technology, an undisputed success in the field of professional audio, into a new range of applications within both the live and fixed installation fields. The column system is compact and elegant, with a refined yet functional design. Most importantly it offers an uncompromising quality capable of successfully solving applications where conventional systems are inadequate. Compared to a traditional two-way speaker, the sound is distributed in a much more uniform manner into the listening area, regardless of whether the application is indoors, outdoors or acoustically difficult in terms of reverberation. The cylindrical wave front of the CLA projects sound forwards in a very precise and coherent fashion without the reverberant performance that is typical of conventional speakers which can excite environmental reflections, directing acoustic energy where it is not needed, especially towards the ceiling and floor. Even acoustic feedback such as that generated by microphones is rejected to a far greater extent than a conventional enclosure. Finally, the columns narrow dimensions allow the discreet, unobtrusive integration of the column into any environment. The qualities of the system CLA can be summarized as: High-end sound quality with a frequency response of 33Hz to 20kHz, designed specifically for live Improved dispersion within a set listening area plus extended projection High power performance and dynamic range thanks to the tri-amplification system Portability and modularity – elements can be rapidly daisy-chained via a quick release system, extending both the vertical directivity and sound pressure level Design and elegance for easy integration even in the most demanding installations – the compact dimensions ensure listeners will focus on the sound and not the speaker! Wide horizontal dispersion VERTUS CLA 118SA Processed Active Subwoofer 1200W - 138 dB SPL Active subwoofer in bass-reflex design 460mm (18”) B&C high excursion woofer with 75mm (3”) voice coil Frequency response from 33Hz to 100Hz 1200W RMS Class D power amplifier with swittching mode power supply Processor DSP with 8 presets, cardioid configuration, delay Control Panel with XLR input and link, volume, presets, delay, phase 0 ° -180 °, ground-lift Neutrik powerCON power IN and LINK connectors 15mm (5/8”) birch plywood with scratch-resistant coating Stackable M20 (20mm) top mount speaker stand socket, two diecast aluminium carrying handles with rubber inserts Optional 4 swivel-mount casters 80mm (3.15”) on request Suitable for low frequency extension and reinforcement of the CLA406A array, especially for live performance Digital processor Hardware for permanent installation MEDIA LIBRARY DATASHEET USER MANUAL DWG DRAWINGS PDF DRAWINGS OTHER PRODUCTS VERTUS CS 1000 Compact line array integrated system 600W + 400W RMS 129 dB SPL VERTUS CLA 406.2A Active Column Line Array VERTUS CLA 406A Active Column Line Array VERTUS CLA 604A Column Active Line Array VERTUS CLA 208SA Processed Active Subwoofer VERTUS CLA 604 Passive Column Line array Configuration: 1 reflex way Built-in amplifier LF/HF: 1200 W RMS Built-in amplifier peak LF/HF: 2400 W Frequency response: 33Hz - 120Hz -6dB Low Frequency woofer: 1x18 -3 coil inch Maximum SPL cont/peak: 134/138 half-space dB Dispersion: omnidirectional HxV Input impedance: 22 Kohm Crossover Frequency: preset dependant KHz AC Power requirements: 640 VA Input connector: XLR with loop Power cord: 5 / 16.4 m/ft Net Dimension (WxHxD): 550x550x660 / 21.65x21.65x25.98 mm/inch Net Weight: 40/88.18 kg/lb Transport Dimension (WxHxD): 700x700x800 / 27.55x27.55x31.49 mm/inch Transport Weight: 50/110.23 Kg/lb VERTUS CLA 406A 600W + 300W 133 dB SPL Active Column Line Array 2-way bi-amplified line array column system 4 x 165mm (6.5”)  custom woofer voice coil 38mm (1.5”) B&C HF neodymium driver with 36mm (1.4”) exit and 64mm (2.5”) voice coil Waveguide FBT large format with dispersion 100 ° H x 25 ° V Frequency response from 65Hz to 20KHz Amplifiers Class D 600Wrms for LF and HF 300Wrms with switching power supply Processor DSP with 8 EQ presets Control Panel with XLR input and link, volume, presets, filter-HP, ground-lift Neutrik powerCON power IN and LINK connectors 12mm (1/2”) birch plywood with scratch-resistant coating. 12 attachment points above and below for the optional hardware that allows the installation of hanging or pair two CLA406A with angle of 0 ° - 10 ° - 20 ° in the vertical plane Top side tilted 10 ° for the inclination of two columns without damaging gap between the waveguides for a wavefront extremely consistent over the 18kHz 35mm (1.3/8”)  top hat for stand mount facility It is ideal for live applications, assisted by sub CLA 118SA, which for fixed installations